Ink Settings: Slot 1= Black, Slot 2= Cyan, Slot 3= Magenta, Slot 4= Blue, Slot 5= Orange, Slot 6= Yellow. Fabric Description: Polyester Poplin Lab-value fabric: L=92.57, a=0.74, b=-5.77 Density Printed Black: L=37.15,a= -0.01, b=0.95 Printer Settings: 360x720 dpi Use this printer settings only for testing. You will need and get better saturation with using the standard 720x720 dpi resolution if printing directly onto fabric. Loading source calibration file Unzip and copy the files to your program's working folder. You will need to check and adjust the correct path's within the PCL file (using a text editor such as NotePad) accordingly the location of your program's working folder. If a correction was necessary you'll need also to adjust the drive and path's within the MAIN.CMF file. (using WordPad as text editor) Note: Everything you may replace in those files is case sensitive!!)
Using the pre-calculated calibration (CTB) only To use the pre-calculated CTB just store the file in a convenience location of your harddrive. If desired just load the profile. All other files can be deleted. Common working folders: - D:\StudioMaster Data for StudioMaster Installations
- C:\Atelier for RipMaster installations
Calibration Powered by StudioMaster-RipMaster. (2006-06-28) | 
