|
|
|
|
|
|
- All ink lights are blinking.
- Power button is blinking
- Paper eject button is blinking
If you do not find any paper jam issues this indicates e.g. that the waste ink pads inside your printer need to be exchanged, for this maintenance please call a certified Epson Service technician near you. If you however are using a continuous ink supply system (CISS) and/or you have installed an external waste ink bottle you may reset the waste ink counter of the printer by the control panel. Important! Please follow the instructions below ONLY if you indeed installed an external waste ink reservoir because you may damage your printer if the waste ink inside the printer starts to overflow. Epson 2100-2200 waste ink counter Reset Procedure. - Turn OFF the printer power
- Unplug the power cable
- Unplug the computer interface cable
- Let the printer rest for at least 1 minute before continue
- After a minute plug in the power cable but do not attach the computer interface cable
- From the control panel press and hold down simultaneously the ROLL and PAPER buttons
- Press now the POWER button
- When all lights blinking and after the POWER led blinks twice (2x) release the ROLL and PAPER buttons
- Press quickly after releasing the roll and paper button the ROLL button again and hold it for about 10 seconds.
The ink counter is reset and the printer will start. Turn OFF the printer and reattach the computer interface cable. Turn power on and try to print a document. Hope this is helpful. |
|
|
|
